A water-based sand-containing primer. Improves adhesion prior to levelling or tiling. Suitable for dense wall and floor surfaces in indoor and outdoor areas.
Suitable for priming of
– Non-absorbent substrates, e.g. ceramic tiles, painted or PVC-surfaces and painted or PVC-coated steel sheets (e.g. prefabricated ‘sheet metal bathrooms’). Prior to priming, remove any wax, grease and dirt from the surface to be tiled using an alkaline cleaner and rinse thoroughly. After the surface has dried, sand it, if necessary, and remove the sanding dust.
– Dense, firm and free-from-dust concrete and cement-based levelling substrates (prevent capillary moisture absorption to the substrate) Remove cement laitance, dust, loose dirt and grease. If needed, sand the surface.
– Gypsum board, plywood and chipboard.

The primer has good moisture resistance. Due to its viscous consistency the primer stays well on vertical surfaces and does not splash much. Builds a proper bond between the surface and the smoothing/levelling compound. Alkalinity of cement does not impair the effect of the primer. Not suitable to be used as an additive to levelling compound.

Read more: https://www.kiilto.com/product/kiilto-fix-primer/

A water-based primer suitable both for porous and non-absorbent surfaces in interior areas prior to levelling. For non-absorbent substrates, we recommended using Kiilto Fix Primer prior to levelling.

Kiilto Start Primer is suitable for the priming of

– concrete- and cement-based levelling compounds (dilution: 1 part primer/4 parts water)
– floors with remains of old adhesive, such as synthetic resin and bitumen (use undiluted)
– surfaces that cannot tolerate moisture, e.g., gypsum and wooden surfaces (use undiluted)
– construction boards, e.g., chipboard and gypsum board etc. (use undiluted)
– non-absorbent surfaces, e.g., paint and ceramic tiles (use undiluted)

Primer has good moisture resistance and forms a good bond between the levelling compound and the subfloor. Alkalinity of cement does not impair the effect of the primer. Not suitable to be used as an additive to levelling compound.