Kiilto LK


A polymer based base plaster for interior walls and ceilings in dry areas. Maximum level thickness in partial plastering 5 mm, in over plastering 3 mm.

Special features

  • polymer based, light coloured, filling
  • base plaster for walls and ceilings
  • coverage: 1.2 kg/m²/mm
  • coatable: 3 mm/1 d
  • dry interior areas

Kiilto LK is a wall plaster for dry indoor wall and ceiling surfaces. Rough surfaces are plastered first with Kiilto SK or Kiilto TT –wall plasters. The top smoothing is carried out with Kiilto LH – wall plaster. The finished surface can be smoothed further or painted. Not suitable under tiling or wall vinyl.

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.

Strew Kiilto LK powder slowly in cool (+18 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 15 min and then remix once again. Apply the plaster by hand with a steel trowel or spray with a spraying gun for plasters. Also, the sprayed coat should be levelled by hand with a steel trowel. If left over plaster is saved for the next day, the container should be covered carefully to avoid drying.

Read more: