Kiilto Pro LM

Lightweight plaster

A lightweight, ready-mixed plaster for finishing walls and ceilings in dry interior areas prior to painting and wallpapering. Suitable also for fixing and smoothing reinforcing tape to gypsum plaster boards.

Special features

Very good filling capacity max. 4 mm, low drying shrinkage
Light grey
Trowel or roller application
Also suitable for over levelling glass fibre wallpaper
Can be painted or wallpapered
Suitable for over levelling Kiilto Airblock sealing products on wall surfaces
Coverage 1 l/m²/mm
Drying time approx. 1-2 h/mm

Category: Readymix plasters

Description

Application

Kiilto LM is a water-soluble, ready-mixed lightweight plaster. Suitable also for fixing and smoothing reinforcing tapes to gypsum board plates. Provides suitable surface for painting and wallpapering. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards.

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat. Kiilto LM is a ready-mixed lightweight plaster. After long storing, stir before use. The product can be diluted with water, if needed. The plaster is applied with a steel trowel. The plaster can also be applied with a long haired roller, and then the surface is smoothed with a steel trowel.

When fixing reinforcing tapes, apply the plaster in joint and press the paper tape firmly in the plaster. Smooth the joint by applying a second plaster layer using a broader steel trowel. After drying the surface can be easily sanded.

When smoothing painted glass fibre wallpaper, apply first a plaster layer, then sand and add another thin plaster layer. This diminishes the risk of pinholes in paint.