Kiilto TT


A plaster for brick walls and fillings in dry and wet areas. Partial plastering 1-30 mm, over plastering 1-5 mm. Also suitable for exterior areas, when coated. Cementitious.

Special features

  • A plaster for brick walls, can be waterproofed
  • general levellings
  • coverage 1.4 kg/m²/mm
  • coatable: 5 mm/1 d, 30 mm/4 d
  • for interior areas; also for exterior areas, when coated

Kiilto TT is a wall plaster for interior and exterior use. Suitable for levelling and filling rock material surfaces. The finished surface can be tiled or waterproofed with Kiilto waterproofing membrane. It can also be over plastered with other Kiilto wall plasters depending on the application.

Instructions for use

The surfaces to be plastered must be solid, clean and free from dust. Dry surfaces must be lightly moistened prior to plastering. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.

Strew Kiilto TT powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 10-15 min and then remix once again. Apply the plaster by hand with a steel trowel or spray with a spraying gun for plasters. Also, the sprayed coat should be levelled by hand with a steel trowel.

Read more: